Inhale Ethyl Chloride

How to Change a Tire Sitema

This is very basic, not really science is more rubber or change a tire, only to have the necessary tools to work:

What you need:

• a spare tire (make sure yours is properly inflated)
• A key cross
A Cat Work Gloves
• A plastic, cardboard and garbage bags

night for tire changes:

• An emergency triangle reflector lamp
A

Your car comes with several of these items, but must ensure before a puncture occurs.

Step 1 - Find a Safe Area:

If you have a flat tire on the road, do not try to change it, especially if you are very close to the roadside. It is very safe to change a tire on the shoulder, because it is like being in the slow lane. Emergency call service. If you are in a quieter way, it is also important to be clear of the traffic. If possible, you have to push the car to a straight part of the road instead of being in a curve. The traffic is better when possible to avoid You can see it coming. Also be sure to choose a site that is flat, which is not tilted and that is land, to be safe when the jack lifting the car.

As soon as I find a good site, put the car in "park" (or in gear if the transmission is manual), set the parking brake and turn signals of danger. If at night, want to put a triangle Emergency reflector to warn other drivers. You should take the keys from the ignition and turn off the car, but be sure not to lose while changing the tire.

Step 2 - Prepare your tools:

If you have a cardboard or plastic, place it on the ground near the tire to be changed for a clean, dry area where work. If has a pair of gloves, wear them to keep their hands clean and protected. The next thing you need is the spare, often located at the bottom of the car's trunk. Consider some of the spare tires are often for temporary use (known as "space saving") in what amounts to a tire shop to replace or repair the tire. Your manual may tell you where exactly to find the spare. The cat will usually be found in the same place where the spare tire. Bring these items to your work area, gloves, lamps (if necessary) and the spare tire (some cats manage all functions as a key cross). Now you are ready to change the tire.

Step 3 - Loosen the lug nuts of the wheel:

Loosen the lug nuts of the tire when the car is in the ground. It's easier after lifting. If the tire has plug would have to remove to remove the studs. You can use the jack or lug wrench to remove. If Briles have some security lock, check your user manual to remove them.

Once the studs are exposed, place the key in and turn them against clockwise to loosen. Give one or two turns, but be sure not to remove them completely. Do the same for everyone.

If one is too tight, help yourself to support the ends of the lug wrench with one foot and one arm. Make sure the lug wrench is secured to stud, before trying this method. Finally if you have a loose oil around, you can apply it on the line of studs, wait a moment and can be moved more easily.

Step 4 - Pick Your Car:

Place the jack under the car and insert the slot in the chassis or indicated support for this effect. Once the cat is high enough to touch the chassis of your car, place it under the designated spot for it (behind the front wheel or in front of the rear wheel, as specified in the manual). Now you can lift your car, turning the jack handle in the direction of clockwise until the tire is 5 or 6 inches above the ground, leaving just enough space for remove the flat tire and put the spare. Be sure not to put hands or feet under the vehicle once it has been lifted.

Step 5 - Remove Tire:

Place nuts in a safe place where they can not lose. To remove the wheel, each wheel firmly grasp and pull straight out. Place the flat tire and slide it under the body or suspension car at the corner where the cat is being used, if the cat slips will still be supported.

Step 6 - Replace the wheel:

Take the spare tire and put it on the drum, trying to match studs into the holes of the wheel. Place each hand tightening only to hold the rim. If your car uses screws Instead of nuts, holes should align with the wheel drum. The press will once the car is down. Fasten the top, so it will be easier to tighten the others.

Step 7 - Lower Your Auto:

Now, turning the cat in the opposite direction, lower the car to the ground. When the weight is no longer on the cat, remove it from under the car, and follow turning the knob until it is completely closed and set aside. you need to fully tighten the lug nuts using your lug wrench in the direction opposite to that used to loosen. Tighten studs diagonally. Repeat with all the studs. Replace the wheel cap (if any), putting one side in place and the other parties getting hit with the hand or fist.

Step 8 - Return to the Road:

After just change the tire, keep your lug wrench. the flat tire, jack and everything else in the trunk and back on the road. If your spare tire is temporary, do not drive at high speeds (up to 60 kilometers) and be sure to replace the soon as possible. It is also a good idea to have a mechanic check the wheel bolts to be sure.

So we have a safe trip and we will avoid the trouble to call torque assistance, start with the mechanics in this blog.